Plus Power M33 Modular UPS 80~300KVA

Download Annex

Main Features

• High efficiency online double conversion technology

   Plus Power is applied with online double conversion technology to reach its high performance over 94.5% at 50% load. It significantly reduces overall Total Costof Ownership (TCO).

• High scalability

   DSP control provides an improved solution with high performance. Integratedwith modulardesign andparallel technology, Plus Power simplifies future power expansion.

• Unity output power factor

   Plus Power delivers unity outputpower (kVA=kW) providing the maximum power capacity to mission critical loads. It satisfies the requirements of the latest servers and optimizes IT 

   investment with every penny.

• Modular design lowers MTTR

   Modular design is applied in power module, STS module and battery module. It will simplify maintenance and replacement with low MTTR (Mean Time To Repair).

• N+1or N+X parallel redundancy for power guarantee

   Scalable architecture allows you to optimize costexpense to meet power demands by vertically expanding in a single rack enclosure from 30KVAto 210KVA andachieve N+1 or 

   N+X redundancy in th e same rack. Supporting up to 420Kva system with 210Kva x2 in parallel operation.

• Ease of installation and maintenance

   Built-in maintenance bypass assures continuous power to critical loads during UPS maintenance. Besides, to facilitate installation and maintenance, all panel control and connectors 

   are front accessibility.

• Flexible battery configuration adapts different applications

   Battery numbers can be adjusted flexibly. It will adapt different power demands and shorten system downtime. Battery voltage can be set from 32 to 40 pieces per string.

• Highly reliable operation with redundant power supply in STS

   Plus Power provides 2 power supplies in STS, ensuring no risk of shutdown.

• User-adjustable charging current

   Plus Power provides maximum 8A or 6A charging current for every power module and it's user-adjustable based on requirement.

• High overload capability

   Plus Power supports, 110% overload for 60 minutes, 125% for 10 minutes, and 150% for 1 minute.

• Graphic 5.7”LCD design for easy management

   Designed for easy management, the intuitive design of 5.7" graphic LCD display enhances the readability of identified and advanced configuration.

• Optional 10" touch LCD panel

  PHASE3-phase in / 3-phase out
  CABINET CAPACITY*90 KW120 KW80 KW or 120 KW120 KW or 180 KW200 KW210 KW300 KW
  BATTERY TYPEBuilt-in BatteryExternal Battery
  POWER MODULE CAPACITY30KVA / 30KW30KVA / 30KW or 20KVA / 20KW20kKVA / 20KW30KVA / 30KW30KVA / 30KW
  MAX. POWER MODULE NO.344610810
  MAX. BATTERY SET NO.**35-----
  Nominal Voltage3 x 380VAC/400VAC/415VAC (3Ph+N)
  Voltage Range305 ~ 478 VAC at 100% load; 208 ~ 304VAC at <70% load
  Nominal Frequency50/60Hz (Auto Sensing)
  Frequency Range40Hz ~70Hz
  Power Factor> 0.99 @ 100% Load , >0.98 @ 50% Load
  Harmonic Distortion (THDi)< 3% @ 100% load
  Nominal Voltage3 x 380VAC/400VAC/415VAC (3Ph+N)
  Voltage Regulation(Steady state)± 1% Typical (balanced load) ;  ± 2% Typical (imbalanced load)
  Nominal Frequency50/60Hz
  Frequency Range(Synchronized)46Hz ~ 54Hz or 56Hz ~ 64Hz
  Overload Capability1 hour for 110%, 10 mins for 125%,; 1 min for 150%, 200ms for >150%
  Harmonic Distortion 2% THD (Linear Load) ;  4% THD (Non-linear Load)
  EfficiencyUp to 94.5%
  Nominal Voltage+/- 216V (12V x 36 pcs)
  Maximum Voltage+/- 240V (12V x 40 pcs)
  Minimum Voltage+/- 192V (12V x 32 pcs)
  Float Charging Voltage2.25V / Cell
  Boost Charging Voltage2.35V / Cell
  Temperature CompensationYes

  Maximum Charging Current

  (Per Power Module)


8A for 30KW power module

 6A for 20KW power module


  Cabinet Dimension 

  (D x W x H) mm

1100 x 600 x 14751100 x 600 x 20101100 x 600 x 14751100 x 600 x 14751100 x 600 x 2010
  Net Weight (Kg)675932335 or 333437.5 or 434.5611549620
  Operating Temperature0 ~ 40°C
  Relative Humidity0 ~ 95% non-condensing
  Altitude<1000m for Nominal power
  IP ProtectionIP 20
  Smart RS-232 / USBSupports Windows2 2000/2003/XP/Vista/2008, Windows2 7/8/10, Linux and MAC
  Optional SNMPPower management from SNMP manager and web browser
  SafetyIEC/EN 60950-1; IEC/EN 62040-1
  EMCIEC/EN 62040-2 Category C3

  *When temperature is above 30, the output power factor will be de-rated, 0.9 at 31~35and 0.8 at 36~40

  ** One battery module contains 10 pcs of 12V/7Ah or 12/9Ah sealed lead acid batteries in one tray. One complete battery set contains 4 battery modules. 

  ***If the UPS is installed or used in a place where the altitude is above than 1000m, the output power must be derated one percent per 100m.

Plus Power M33 Modular UPS 80~300KVA
Long press to look detail
Long by picture save/share

  • Submit

  • Security Code
    Refresh the code

enquiry content:

You have no items to require

Plus Power M33 Modular UPS 80~300KVA


  • Submit

  • Security Code
    Refresh the code

enquiry content:

You have no items to require

Copyright @ 2021 Honyis Power Solutions Co., Ltd. All Rights Reserved


 粤公网安备 44030702003778号      ICP备2021024839号-1

Chat Now
Chat Now
Online Contacts
+86 13352944880
+86 13352944880
+86 13352944880